INSTALLATION OF YOUR "CLOUD 9" Sterile-Air HEPA PURIFIER
A) Activated Characoal Filter.
B) Fiberglass Pre-Filter.
C) Protection Grill.
CLOUD 9 Sterile Aire air Hepa purifiers are designed and engineered to provide years of dependable
and efficient air purifying, periodic filter replacement, using factory original filters and minor maintenance are
all that is required to insure proper functionality.
INSTALLATION INSTRUCTIONS FOR YOUR AIR PURIFIER
1.- Remove the Protection Grill.
2.- Remove the Fiberglass Prefiltrer (blue).
3.- Remove the Activated Characoal Filter (black).
* To remove:
a) It Displeases first up
b) It Displeases the low part toward out
4.-The blower motor bearangs ( top & bottom ) should be oiled before using
the unit for the first time. A special CLOUD 9 motor lubricant has been included with
your purifier (behind the characoal filter) 6 drops should be placed in each oil copper tube.
* Turn Engine Off
5.- Place the Activated Characoal Filter (black) "Take it out of the bag of plastic."
6.- Place the Fiberglass Prefilter (blue).
7.- Place back the Protection Grill.
8.- Turn on your purifier to maximum speed at least one hour.
* It is advisable for the perfect lubrication of the motor.
MAINTENANCE OF YOUR AIR PURIFIER CLOUD 9
- Change the Fiberglass Prefilter (blue) every month.
- Change the Activated Characoal Filter (black) every 6 months.
- The blower motor bearings should be oiled every 3 months of operation.
- If you need filters, oil's, or a complete service for your Air Purifier you can contact us at: Bosque de Ciruelos 130 - 1202, Col. Bosques de las Lomas, Mexico City.
Phone: 55967695, 55296-5519, Fax. 5251-0781. or you can make an On-Line Purchase through this site.
|
|
